Basic Measurement Screen (Bms) - Nikon DTM-502 Series Instruction Manual

Key
Turns the Power ON and OFF.
PWR
Turns the Backlight ON and OFF.
Holding down the key for a second displays a menu:
"1:Backlight, 2:Reticle light, 3:LG, 4:Sound".
Displays MENU items: 1:Job, 2:Cogo, 3:Settings, 4:Data,
MENU
5:Comm., 6:1sec-Keys, 7:Calibrate, 8:Time.
Changes the key input mode between alpha-numeric ( ),
numeric ( ) and List/Stack for inputting PT or CD. 1
MODE
Also, the Qcode mode can be activated by this key on the

Basic Measurement Screen (BMS).

Records measured/input data, proceeds to next screen or
confirms and accepts the current data if input mode.
Holding the key for a second on the BMS, enables recording
REC /ENT
the measurement as a CP record instead of SS.
Also, on the BMS or Stakeout observation screens, outputs
the current measurement data (PT/HA/VA/SD) through the
COM port when "Settings-Rec-Data Rec" is set to "COM".
Returns to the previous screen.
ESC
In the numeric or alpha-numeric input mode, clears the input
data.
Starts distance measurement based on the measure mode
MSR1
settings for the key. Holding down this key for a second
displays its measure mode settings (Target, Prism Const.,
Mode and AVE).
MSR2
(See p.3-22)
Hold down the key for a second to change the combination
DSP
of the display items for DSP1/4, 2/4 and 3/4 as well as
S-O3/7, 4/7 and 5/7 screens.
Displays the Angle menu.
ANG
Horizontal angle zero set, input horizontal angle, Repetition
angle shots, F1/F2 measurement and Hold horizontal angle
are available.
Summary Details
p.3-18
p.3-5
p.3-85
p.3-25
A
p.3-68
p.3-20
p.3-23
p.3-32
3-2
3