Nikon DTM-502 Series Instruction Manual page 195

6) In Programs
• In Programs function, the Last ST record will NOT be resumed by the
[1.Continue]. Only when you are sure of the previous ST coordinates and that
the current HA orientation is still correct, the option [1.Continue] can be used.
Otherwise, records in this function may not turn out to be correct.
7) In Job Manager
8
8-5
NEZ full coordinate is required in S-Plane
function.
Action: Press any key to return to the PT input
screen. Use 3D point.
If no Stn Setup or BS check is done when entering
the Program functions.
[1:Continue] = goes to Programs menu
[2:Stn Setup] = jumps to STN menu
[ESC] = returns to the BMS
There are already 32 Jobs (maximum) when you
try to create a new job.
Action: Press any key to return to the Job
Manager. Move the cursor by Up/Down
arrow keys to an old job and delete it by
[DEL].
No space to create a job or record a point is
available.
Action: Press any key to return to the Job
Manager. Move the cursor by Up/Down
arrow keys to an old job and delete it by
[DEL].