Offset Measurements O/S; Tape Offset Measurements - Nikon DTM-502 Series Instruction Manual

O/S
6) Offset Measurements
9
GHI

1. Tape Offset Measurements

Press the [O/S] and [1] key from the BMS to enter
the Taped offset function.
3
When no distance measurement was taken before
pressing [O/S] → [1], a temporary measurement
screen is displayed.
Sight the target and press the [MSR1] or [MSR2].
Input offset distances from the measured point. By
Up/Down arrow keys, place the cursor on the field
you are to take an offset.
Up(+)
Left (-)
Out (+)
Down(-)
In (-)
Right (+)
You can enter any combination of taped offset
distances to specify the point.
Press [ENT] at the last line to proceed to the
recording PT screen.
3-70