Hot Key [Hot]; Height Of Target; Temperature & Pressure; Select Target-Set - Nikon DTM-502 Series Instruction Manual

HOT
7) HOT Key
-
.-+
The [HOT] key contains Height of Target,
Temperature & Pressure, Select Target and Note
input functions. It is available on any observation
screen.
3

1. Height of Target

You can change the height of target by pressing the
[HOT] and [1] keys.
[Stack] softkey is also available to input HT. (Up to
20 values are registered in the HT-Stack.)
2. Temperature & Pressure
Set the current temperature and pressure by [HOT]
→ [2]. Type the ambient temperature and pressure.
The "ppm" value is updated automatically.

3. Select Target-set

The Target Set allows you to switch the target type, the prism constant and the height
of target in one time. For instance, when switching between two types of targets (e.g.
ref. sheet and prism) this function can save time and reduce the number of key
presses.
You can prepare up to five Target-set.
Use numeric keys ([1] to [5]) or Up/Down arrow
keys and press [ENT] to select a Target-set.
[Edit]
3-28