Nikon DTM-502 Series Instruction Manual page 138

4-3-1. Edit RAW record
Place the cursor using the Up/Down arrow keys to
the record you are going to edit, then press [Edit].
3
[Edit] can be activated from the detailed data screen
shown right.
Move the cursor using the Up/Down arrow keys and
modify necessary fields.
• The Z-coordinate of a measurement record SS/SO/CP is recalculated when its HT
is changed.
When you press the [ENT] key on the last line of the
edit screen, it shows a confirmation screen.
Press the [Yes] softkey or the [ENT] key to accept
the modification and return to the Data View screen.
Press the [No] softkey or the [ESC] key to go back
to the edit screen.
3-112