Cod Key [Cod]; Updating Default Cd; Qcode Observation - Nikon DTM-502 Series Instruction Manual

6) COD Key
On the BMS, press the [COD] key to change the default feature code that will appear
in the CD field when you record a point.
3

1. Updating Default CD

When you press the [COD] key on the BMS, a
window for inputting the feature code is displayed.
[List] and [Stack] functions input are also available
to input the CD.

2. Qcode Observation

Select the [Qcode] softkey to enter the Quick-code
observation routine.
In this function, you can use the ten numeric keys to
both codes and shoot a point.
By pressing the [Sett] softkey, you can change the
measurement mode for the Quick code observation.
• In Quick code measurement, the "Rec mode" can only set to "Confirm" or "ALL"
(-finish recording data).
3-27
COD
3
YZ
[Sett]