Deleting Job - Nikon DTM-502 Series Instruction Manual

VA zero: Zenith / Horizon / Compass
AZ zero: North/South
(Coordinate) Order: NEZ/ENZ
HA: Azimuth/0 to BS
3
Each setting can be changed by Right/Left arrow keys. You can move the cursor
using Up/Down arrow keys and change any setting.
Pressing the [ENT] or Down arrow key on each line will move the cursor to the next
line.
Finally, a job will be created using those Job settings after pressing the [ENT] key on
the last Job setting line.

1-3. Deleting Job

On the Job List screen, move the cursor to the Job
you want to delete.
Then, press the [DEL] softkey.
A confirmation screen is shown.
Press the [ENT] or [DEL] key to delete the Job you
chose. Press the [ESC] or [Abrt] to cancel the
process and return to the previous screen.
• There is no "UNDELETE" function in the Job manager so before you press the
[ENT] key, please make sure that the selected Job is the one you really want to
delete.
It returns to the Job List screen after deleting the
Job.
3-87