Nikon DTM-502 Series Instruction Manual page 192

2) When searching a point
• This can be shown from any functions, such as Station setup or Stakeout, where
the PT/CD is input.
Input PT you are going to record already exists in
the current Job.
(Existing coordinate record can NOT be
overwritten by measured data.)
Action: Press any key to return to the point input
screen. Change PT.
Input PT you are going to record already exists in
the current Job.
(If existing record is SS/SO/CP, it can be
overwritten by measured data.)
[Abrt]/[ESC] = returns to the PT input screen.
[XYZ] = records RAW and updates XYZ data.
[RAW] = only records RAW data.
There is no point matching the criteria you
entered.
Action: Press any key to return to the point input
screen.
8
8-2