Nikon DTM-502 Series Instruction Manual page 77

====================== Advanced Features =====================
Specify a Stakeout List by Range-Input
Press the [Fr/To] key while the cursor is in the PT
field to input points by range.
3
Input the start point (Fr) and the end point (To). The
range has to be less than 1001 points.
A point list is shown when existing points are found
between 'Fr' and 'To'.
Select a point by Up/Down arrow keys and press the
[ENT] key to go to the stakeout observation screen.
When you assign a Control Job and the additional
points are found there, a softkey [Ctrl] is shown
beneath the List.
===========================================================
3-51