Configuring Device Name In Tia Portal Project - Comtrol DeviceMaster PNIO 2000 Series User Manual

Configuring Device
Name in TIA Portal
Project
DeviceMaster PNIO | UP User Guide: 2000639 Rev. A
After assigning a device name to the DeviceMaster, the same device name also
needs to be configured in the TIA Portal project.
1. In TIA Portal, double-click the DeviceMaster module to open the Device View.
2. On the Properties | General tab, click the PROFINET interface [X1] | Ethernet
addresses, which opens the Ethernet addresses properties window.
3. When the Generate PROFINET device name automatically check box is selected,
a default device name is entered automatically. If the DeviceMaster has been
assigned a different device name, then un-check the check box and manually
enter the device name.
4. Compile and download the project.
Notes:
• Configuring a PROFINET device name in the project does not automatically
assign that name to the DeviceMaster. Use the procedures in
Device Name Using the Web Interface
in TIA Portal on Page 76 to assign a device name to the DeviceMaster.
• The device name must be unique on the network.
Configuring the DeviceMaster in TIA Portal
on Page 75 or Assigning the Device Name
Configuring the DeviceMaster in TIA Portal - 77
Assigning the