Assigning The Device Name In Tia Portal - Comtrol DeviceMaster PNIO 2000 Series User Manual

Configuring the DeviceMaster in TIA Portal
Assigning the
Device Name in TIA
Portal
76 - Configuring the DeviceMaster in TIA Portal
4. Click the Save button.
A reboot is required for the new name to take effect.
5. Click System | Reboot to reboot the gateway.
Use the following procedure to configure the Device Name using TIA Portal.
1. In TIA Portal, open on-line
access.
2. Click Function | Assign name,
enter the desired PROFINET
device name.
3. Click the Assign name button.
The new device name takes
effects immediately. A reboot is
not required.
DeviceMaster PNIO | UP User Guide: 2000639 Rev. A