External Power Supply Specifications; 1-Port Panel Mount 5-30Vdc Power Supply - Comtrol DeviceMaster PNIO 2000 Series User Manual

1-Port Panel Mount 5-30VDC Power Supply

DeviceMaster PNIO | UP User Guide: 2000639 Rev. A

External Power Supply Specifications

This section discusses information that you may need if you wish to use your own
external power supplies.
• 1-Port Panel Mount 5-30VDC Power Supply
• PNIO-2101 and PNIO-2201: 1-Port DIN Rail Power Supply
• PNIO-2202 and PNIO-2402: 2-Port (Serial Terminals) Power Supply
151
• PNIO-2102 and PNIO-2302: 2-Port DB9 Power Supply (Bottom)
• PNIO-2102 and PNIO-2302: 2-Port DB9 Power Supply (Top)
• PNIO-2304: 4-Port DIN Rail Models Power Supply
• 4-Port Panel Mount Power Supply
This table provides specifications for the power
supply shipped with the DeviceMaster 1-port
panel mount.
Comtrol Power Supply: 1-Port 5-30VDC
Input line frequency
Input line voltage
Output voltage
Output current
This table provides the specifications, if you
intend on using your own power supply.
DeviceMaster UP 1-Port 5-30VDC External Power Supply
Output voltage†
Current†
Power
† Any power supply that meets current consumption, voltage, power, and
connector pinouts requirements can be used.
on Page 149
on Page 154
43-63 Hz
90-260 VAC
24VDC
500 mA @ 24VDC
5-30VDC
100 mA (Min) @ 24VDC
2.5 W
External Power Supply Specifications - 149
on Page 150
on Page
on Page 152
on Page 153
on Page 154
Screw Terminal Connector
-
Earth Gnd
5-30VDC
+
Wire gauge:
AWG 12-22
Return
Positive