Accessing Redboot Commands In Telnet/Ssh Sessions (Portvision Dx) - Comtrol DeviceMaster PNIO 2000 Series User Manual

Accessing RedBoot Commands in Telnet/SSH Sessions (PortVision DX)

DeviceMaster PNIO | UP User Guide: 2000639 Rev. A
You can open a Telnet or SSH session using PortVision DX to access RedBoot
commands.
Use the following procedure to access a telnet or SSH session with PortVision DX.
1. In PortVision DX, PortVision DX, right-click the DeviceMaster in the Device
List pane for which you want to open a telnet session, and click Telnet/SSH
Session.
2. Select Telnet or SSH, leave the Selected Port number, and click Ok.
Managing the DeviceMaster
Managing the DeviceMaster - 135