Technical Support - Comtrol DeviceMaster PNIO 2000 Series User Manual

Troubleshooting and Technical Support
Ports
2
4
DIN
Rail
4
Panel
Mount

Technical Support

160 - Troubleshooting and Technical Support
Model
• The STATUS LED on the device is lit, indicating you have power
and it has completed the boot cycle.
Note: The STATUS LED flashes while booting and it takes
PNIO-2102
PNIO-2202
PNIO-2302
PNIO-2402
• If the LINK (green) LED is lit, it indicates a working Ethernet
connection.
• If the ACT (yellow) LED flashes, it indicates network activity.
• The STATUS LED on the device is lit, indicating you have power
and it has completed the boot cycle.
Note: The STATUS LED flashes while booting and it takes
PNIO-2304
• If the LINK (green) LED is lit, it indicates a working Ethernet
connection.
• If the ACT (yellow) LED flashes, it indicates network activity.
• The PWR LED on the front of the unit is lit, which indicates it
has power and has completed the boot cycle.
Note: The PWR LED flashes while booting and it takes
DeviceMaster
UP†
• The red LNK/ACT LED is lit, which indicates a working
Ethernet connection.
• If the red 100 LED is lit, it indicates a working 100 MB Ethernet
connection (100 MB network, only).
If you need technical support use one of the following methods.
Downloads (FTP)
Downloads (HTTP)
Web site
Phone
Network LEDs
approximately 15 seconds for the Bootloader to complete
the cycle. When the Bootloader completes the cycle, the
LED flashes rapidly for several times then stays off and
blinks approximately every 10 seconds when there is no
PLC connection.
approximately 15 seconds for the Bootloader to complete
the cycle. When the Bootloader completes the cycle, the
LED flashes rapidly for several times then stays off and
blinks approximately every 10 seconds when there is no
PLC connection.
approximately 15 seconds for the Bootloader to complete
the cycle. When the Bootloader completes the cycle, the
LED flashes rapidly for several times then stays off and
blinks approximately every 10 seconds when there is no
PLC connection.
Comtrol Contact Information
ftp://ftp.comtrol.com/html/DM_UP_Main.htm
http://downloads.comtrol.com/html/DM_UP_Main.htm
http://www.comtrol.com
(763) 957-6000
DeviceMaster PNIO | UP User Guide: 2000639 Rev. A