Configuring A Serial Port - Comtrol DeviceMaster PNIO 2000 Series User Manual

DeviceMaster PNIO | UP User Guide: 2000639 Rev. A

Configuring a Serial Port

Use the following procedure to configure the serial ports.
1. Open the DeviceMaster web page using your browser.
Note: The default IP address is 192.168.250.250. You can use PortVision DX
to program your IP address, if necessary (
for Configuration,
2. Click Serial and the Serial Port Overview page displays.
Page 23).
Preparing the DeviceMaster
Configuring a Serial Port - 53