Restoring Factory Defaults (Specific Models) - Comtrol DeviceMaster PNIO 2000 Series User Manual

Managing the DeviceMaster

Restoring Factory Defaults (Specific Models)

134 - Managing the DeviceMaster
Use the following procedures to restore the following DeviceMaster models to the
factory defaults:
• DeviceMaster 1-port DIN rail models
• DeviceMaster 2-port DIN rail models
• DeviceMaster 4-port DIN rail models
If Technical Support advises you to restore the DeviceMaster factory defaults,
depress the Reset/Restore switch for greater than 5 seconds.
Restoring the DeviceMaster DIN rail models resets the following to their factory
defaults:
• Port settings
• Network settings
• Password
• Telnet enable
• Start up time-out
• SSL enable
• Telnet time-out
DeviceMaster PNIO | UP User Guide: 2000639 Rev. A