Appending
Delimiters
DeviceMaster PNIO | UP User Guide: 2000639 Rev. A
For output devices that require STX and/or ETX delimiters. They can be added
when formatting the output packet in IO controller. Or, you can configure the
DeviceMaster to append delimiters to output packets automatically.
1. Open the web interface, click Serial | Port X.
2. Configure the STX and ETX as desired in the Tx Append Delimiters from PLC
section, as shown in the following figure. The DeviceMaster appends the
configured STX and/or ETX to all output packets before transmitting.
IO Data Handling
IO Data Handling - 87