Adding A Permanent Virtual Circuit (Pvc); Removing A Permanent Virtual Circuit (Pvc) - 3Com CoreBuilder 2500 User Manual

Adding a Permanent
Virtual Circuit (PVC)
Top-Level Menu
system
ethernet
interface
display
fddi
route
define
atm
arp
modify
bridge
atmArpServer
remove
ip
multicast
addPvc
ipx udpHelper
removePvc
appletalk
routing
snmp icmpRouterDiscovery
analyzer ospf
script
rip
logout ping
statistics
Removing a
Permanent Virtual
Circuit (PVC)
Top-Level Menu
system
ethernet
interface
display
fddi
route
define
atm
arp
modify
bridge
atmArpServer
remove
ip
multicast
addPvc
ipx udpHelper
removePvc
appletalk
routing
snmp icmpRouterDiscovery
analyzer
ospf
script rip
logout ping
statistics
To add a PVC to an LIS interface:
1 From the top level of the Administration Console, enter:
ip interface addPvc
2 Enter the index interface number that you want to associate with the
PVC.
3 Enter the Virtual Path Interface (VPI) and the Virtual Circuit Interface (VCI)
pairs in this format:
Example:
Select interface index [1]: 1
Enter [VPI/VCI]: 2/20
You can remove one or more PVCs that are associated with an LIS
interface.
1 From the top level of the Administration Console, enter:
ip interface removePVC
2 Enter the index number of the interface and the VPI/VCI pair that you
want to remove.
. Separate additional entries with a comma.
VPI/VCI
Administering Interfaces 10-7