Administering Interfaces - 3Com CoreBuilder 2500 User Manual

14
Administering
Interfaces
A
DMINISTERING
R
OUTING
This chapter describes how to set up your CoreBuilder
use the AppleTalk protocol to route packets. For more information about
how AppleTalk routing works, see Chapter 8, "Routing with
AppleTalk Technology."
This chapter describes the following tasks:

Administering Interfaces

Administering Routes
Administering the AARP Cache
Displaying the Zone Table
Configuring Forwarding
Configuring Checksum
Pinging an AppleTalk Node
Viewing AppleTalk Statistics
An AppleTalk interface defines the relationship between an AppleTalk
virtual LAN (VLAN) and the AppleTalk network. Every AppleTalk interface
has one AppleTalk VLAN associated with it. Each module has one
AppleTalk interface defined for each subnetwork that is directly
connected to it.
Before you define an associated AppleTalk interface, define a VLAN, as
described in Chapter 9.
You can configure a maximum of 32 interfaces per router.
A T
PPLE ALK
™ 2500 system to