Modifying An Interface; Removing An Interface - 3Com CoreBuilder 2500 User Manual

10-6 C 10: A
HAPTER DMINISTERING
Modifying an
Interface
Top-Level Menu
system
ethernet
interface
display
fddi
route
define
atm
arp
bridge modify
atmArpServer
ip remove
multicast
addPvc
ipx
udpHelper
removePvc
appletalk routing
snmp icmpRouterDiscovery
analyzer
ospf
script rip
logout ping
statistics
Removing an
Interface
Top-Level Menu
system
ethernet
interface
display
fddi
route
define
atm
arp
modify
bridge
atmArpServer
remove
ip
multicast
addPvc
ipx udpHelper
removePvc
appletalk
routing
snmp icmpRouterDiscovery
analyzer ospf
script
rip
logout ping
statistics
IP R
OUTING
You can change the configuration of an interface that you have already
defined.
You can add one or more advertisement addresses or PVCs to an
interface with the
commands as well as with the
or change an advertisement address or PVC with the
you must reenter all addresses or PVCs that are associated with the
interface, not only the one that you want to add or change.
To modify an IP interface:
1 From the top level of the Administration Console, enter:
ip interface modify
You are prompted for the interface parameters.
2 Modify existing interface parameters by entering new values at the
prompts. Press Return at the prompts to accept the values for the
parameters that you do not want to modify.
You can remove an interface if you no longer route on the ports that are
associated with the interface.
To remove an IP interface definition:
1 From the top level of the Administration Console, enter:
ip interface remove
2 Enter the index numbers of the interfaces you want to remove.
If you have defined one or more PVCs on the interface, the
Administration Console displays a message indicating that the PVCs will
be removed with the interface.
This example is a prompt for interface 2, which has one PVC associated
with it:
1 PVC associated with the interface index 2. Do you wish to
continue (yes/no) [yes]:
Press Return to accept the default (
Deleted interfaces are removed immediately.
ip rip addAdvertisement
ip interface modify
yes
and
ip interface addPVC
command. If you add
modify
) to delete the interface.
command,