Administering Stub Default Metrics; Displaying Stub Default Metrics; Defining Stub Default Metrics; Removing Stub Default Metrics - 3Com CoreBuilder 2500 User Manual

Administering Stub
Default Metrics
Displaying Stub
Default Metrics
Top-Level Menu
system
interface
ethernet
route
areas
fddi
arp
defaultRouteMetr display
atm
multicast
interface define
bridge
udphelper
linkStateData
remove
ip
routing
neighbors
ipx
icmpRouterDiscovery
routerID
appletalk
ospf
partition
snmp
rip
stubDefaultMetric
analyzer
ping
virtualLinks
script
statistics
statistics
logout
Defining Stub
Default Metrics
Default
Top-Level Menu
system
interface
ethernet
route
areas
fddi
arp
display
defaultRouteMetric
atm
multicast
interface define
bridge
udphelper
linkStateData remove
ip
routing
neighbors
ipx
icmpRouterDiscovery
routerID
appletalk
ospf
partition
snmp
rip
stubDefaultMetric
analyzer
ping
virtualLinks
script
statistics
statistics
logout
Removing Stub
Default Metrics
Top-Level Menu
system
interface
ethernet
route
areas
fddi
arp
display
defaultRouteMetric
atm
multicast
define
interface
bridge
udphelper
linkStateData remove
ip
routing
neighbors
ipx
icmpRouterDiscovery
routerID
appletalk
ospf
partition
snmp
rip
stubDefaultMetric
analyzer
ping
virtualLinks
script
statistics
statistics
logout
The stub default metric value determines whether the router generates
the default route into the stub areas of the network. This value applies to
area border routers that have attached stub areas.
To display the stub default metric value, enter the following command
from the top level of the Administration Console:
ip ospf stubDefaultMetric display
A message appears indicating the current value:
Stub default metric = 20
Use this command to set the stub default metric value on an area border
router with an attached stub area.
The default value is 1.
To add a stub default metric:
1 From the top level of the Administration Console, enter:
ip ospf stubDefaultMetric define
2 Enter the stub default metric value or press Return or Enter to select the
current value.
Allowable values: 1 through 65535.
Use this command to disable the stub default metric value on the router.
To disable the stub default metric, from the top level of the
Administration Console, enter:
ip ospf stubDefaultMetric remove
The stub default metric is removed immediately.

Administering Stub Default Metrics 13-25