Removing A Server; Flushing Servers; Setting Ipx Forwarding - 3Com CoreBuilder 2500 User Manual

12-8 C 12: A
HAPTER DMINISTERING

Removing a Server

Top-Level Menu
system
interface
ethernet
route
fddi display
atm server static
bridge
forwarding
remove
ip
rip
flush
sap
ipx
statistics
appletalk
snmp
analyzer
script
logout

Flushing Servers

Top-Level Menu
system
interface
ethernet
route
fddi display
atm server static
bridge
forwarding remove
ip
rip
flush
sap
ipx
statistics
appletalk
snmp
analyzer
script
logout
Setting IPX
Forwarding
Default
Top-Level Menu
system
interface
ethernet
route
fddi
server
atm
bridge forwarding
ip rip
sap
ipx
statistics
appletalk
snmp
analyzer
script
logout
IPX R
OUTING
To remove a server from the IPX server table:
1 From the top level of the Administration Console, enter:
ipx server remove
2 Enter the service type of the server.
3 Enter the service name of the server.
The server is immediately deleted.
Flushing deletes all dynamically learned servers from the server table.
To flush all learned servers, from the top level of the Administration
Console, enter:
ipx server flush
All learned servers are immediately deleted.
Use this command to control whether the system forwards or discards IPX
packets addressed to other routers. When you enable IPX forwarding, the
system acts as a normal IPX router, forwarding IPX packets from one
network to another when required. When you disable IPX forwarding,
the system discards any IPX packets that are not addressed directly to one
of its defined IPX interfaces.
The default IPX forwarding setting is disabled.
To enable or disable IPX forwarding:
1 From the top level of the Administration Console, enter:
ipx forwarding
2 Enter the IPX forwarding state (
accept the existing value in brackets.
or
enabled disabled
). Press Return to