Displaying Rtmp Statistics - 3Com CoreBuilder 2500 User Manual

Displaying RTMP
Statistics
Top-Level Menu
system
interface
ethernet
route
fddi
summary
aarp
atm
rtmp
zone
bridge
zip
forwarding
ip
nbp
checksum
ipx
ping
appletalk
statistics
snmp
analyzer
script
logout
To display RTMP statistics, from the top level of the Administration
Console, enter:
appletalk statistics rtmp
The following example shows RTMP statistics:
AppleTalk forwarding is enabled.
inDatas
7204
routeEqChgs
0
inVersionErrs
0
Table 14-2 describes RTMP statistics.
Table 14-2 AppleTalk RTMP Statistics
Field Description
inDatas Number of good RTMP data packets received
inRequests Number of good RTMP request packets received
outDatas Number of good RTMP data packets sent
outRequests Number of RTMP request packets sent
routeEqChgs Number of times RTMP changes the Next Internet Router in a
routing entry because the hop count advertised in a routing table
was equal to the current hop count for a particular network
routeLessChgs Number of times RTMP changes the Next Internet Router in a
routing entry because the hop count advertised in a routing table
was less than the current hop count for a particular network
routeDeletes Number of times RTMP deletes a route that was aged out of the
table
routeOverflows Number of times RTMP attempted to add a route to the RTMP
table but failed due to lack of space
inVersionErrs Number of RTMP packets received that were rejected due to a
version mismatch
inOtherErrs Number of RTMP packets received that were rejected for an error
other than due to a version mismatch
inRequests
0
routeLessChgs routeDeletes routeOverflows
0
inOtherErrs
119
Viewing AppleTalk Statistics 14-13
outDatas outRequests
4865
0
6
0