Removing An Arp Cache Entry; Flushing The Arp Cache - 3Com CoreBuilder 2500 User Manual

10-12 C 10: A
HAPTER DMINISTERING
Removing an ARP
Cache Entry
Top-Level Menu
system
ethernet interface
fddi
route
atm display
arp
bridge
remove
atmArpServer
ip
multicast flush
ipx udpHelper
appletalk
routing
snmp icmpRouterDiscovery
analyzer ospf
script
rip
logout ping
statistics
Flushing the ARP
Cache
Top-Level Menu
system
ethernet interface
fddi
route
atm display
arp
bridge remove
atmArpServer
ip flush
multicast
ipx udpHelper
appletalk
routing
snmp icmpRouterDiscovery
analyzer ospf
script
rip
logout ping
statistics
IP R
OUTING
You can remove an entry from the ARP cache if the MAC address has
changed.
To remove an entry from the ARP cache:
1 From the top level of the Administration Console, enter:
ip arp remove
2 Enter the IP address that you want to remove.
The address is immediately removed from the table. If necessary, the
system subsequently uses ARP to find the new MAC address
corresponding to that IP address.
You can delete all entries from the ARP cache if the MAC address has
changed.
To remove all entries from the ARP cache, from the top level of the
Administration Console, enter:
ip arp flush
All ARP cache entries are immediately removed from the table.