Toro Z Master 7500-D Series Service Manual page 94

CHASSIS
Engine Cover (Cont.)
Installation
1. Using two people, one on each side of the hood, slide the hood to the left on the hinge pins until aligned.
2. With one person supporting the hood, place the washer and cotter pin onto the hinge pin.
3. Install the prop bracket on the pin.
4. While one person is supporting the hood, place the washer and cotter pin onto the prop bracket.
5. Close the hood and secure with the hood latches.
5-41
Z Master 7500-D Series Service Manual
Table of Contents
March 2018 - Digital Edition