Toro Z Master 7500-D Series Service Manual page 109

Deck Replacement - 96 in. (Cont.)
Removal (Cont.)
5. Locate and disconnect the three wire connectors located near the hydraulic lines (96 in. only) (Figure 13).
6. Raise and secure the rear of the machine using jack stands.
7. Remove the rear wheels.
8. Remove the two deck strut bolts (one per side) and the panhard rod bolt (Figure 14).
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
DECK
Figure 13
Figure 14
6-15
Table of Contents