Toro Z Master 7500-D Series Service Manual page 34

Yanmar Engine Replacement (Cont.)
Removal (Cont.)
21. Remove the six bolts (three per side) securing the air shield and cross channel to the machine (Figure 13).
22. Disconnect the global power port and alarm (Figure 14).
23. Disconnect the wire harness clip retainers.
24. Lift the air shield and cross channel from the machine.
4-12
Table of Contents
ENGINE
B
A
D
A
Figure 13
A. HHF Screw C. NI HF Nut
B. Air Shield D. Cross Channel
Figure 14
Z Master 7500-D Series Service Manual
C
C
March 2018 - Digital Edition