Toro Z Master 7500-D Series Service Manual page 129

DECK
Spindle Assembly Rebuild (Cont.)
Disassembly (Cont.)
13. Move bearing spacer to the side in order to gain access to the inner race of the bottom bearing (Figure 35).
Figure 35
14. Gently tap inner race of lower bearing to remove from the housing. Alternate in a star pattern to avoid binding
when removing (Figure 36).
NOTE: Bearings may be damaged during removal. Replace as needed.
Figure 36
6-35
Z Master 7500-D Series Service Manual
Table of Contents
March 2018 - Digital Edition