Control Module
The control module (Figure 6) records hours of operation when the ignition key is ON and the PTO switch is ON.
A. Hours Until Hydraulic Maintenance
B. Battery Voltage
Testing
1. With the ignition switch in the RUN position and the PTO switch closed (ON), verify battery voltage and ground
to the control module.
8-8
Table of Contents
ELECTRICAL
C
B
A
Figure 6
Z Master 7500-D Series Service Manual
D
C. Safety Interlocks (PTO, Brake, Neutral, OPC)
D. Hours Until Engine Oil Maintenance
March 2018 - Digital Edition