Toro Z Master 7500-D Series Service Manual page 110

Deck Replacement - 96 in. (Cont.)
Removal (Cont.)
9. Place the wheel back on the machine. Torque to 95 ft-lbs. (129 Nm).
10. Remove the jack stands and lower the machine.
11. Before removing the deck drive shaft mark the orientation of the deck drive shaft and gear box shaft (for roll
pin orientation) (Figure 15).
12. Remove the roll pin from the deck drive shaft using a roll pin punch (Figure 16).
6-16
Table of Contents
DECK
Figure 15
Figure 16
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition