Toro Z Master 7500-D Series Service Manual page 79

Front Seat Mount (Cont.)
Removal (Cont.)
8. Using a blunt punch and hammer, remove the two vent line clips.
9. Using a flat head screw driver, remove the remaining harness clip.
NOTE: The clips are intended for a one time use and will need to be replaced.
10. Remove the two lock nuts securing the hydraulic fluid tank to the front seat mount.
NOTE: The U-bolt will drop once lock nuts are removed but should not fall through.
11. Remove the four screws located in the corners of the seat mount.
12. Slide the seat mount away from the machine.
5-26
Table of Contents
CHASSIS
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition