Toro Z Master 7500-D Series Service Manual page 44

Yanmar Engine Replacement (Cont.)
Removal (Cont.)
51. Disconnect and plug the 2 front side transmission cooler lines from the bulk head plate.
NOTE: Residual hydraulic oil may be in the lines.
52. Loosen, but do not remove, the two RH torque motor hoses and pivot to gain access to the bulk head plate
mounting bolts.
53. Remove the bulk head plate (Figure 32).
54. Remove the hydraulic line from the bottom of the auxiliary pump (controls deck lift and fold) (Figure 33).
4-22
Table of Contents
ENGINE
Figure 32
Figure 33
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition