Toro Z Master 7500-D Series Service Manual page 81

Front Seat Mount (Cont.)
Installation (Cont.)
8. Place the left and right motion control covers on the machine.
NOTE: Make sure to align the covers with tape marks placed during the removal process.
9. Secure the motion control covers with four screws (two on each side).
10. Slide the floor pan onto the machine.
11. Install the operator's seat,
5-28
Table of Contents
CHASSIS
see "Seat Installation," chapter 5, page 5-24.
Z Master 7500-D Series Service Manual
March 2018 - Digital Edition