Completing Assembly; Attaching The Shroud To The Weight Stack; Verifying Operation Of The Equipment - Precor Discovery Selectorized Series Assembly Manual

Completing Assembly

Attaching the Shroud to the Weight Stack

CAUTION: Do not use power tools to tighten screws attaching the weight
stack shroud components. Using power tools may void the Precor warranty.
A Shroud Assembly Guide is included with your equipment. Please refer to these
instructions to attach the plastic shroud to your weight stack.
Shoulder Press Assembly Guide: Completing Assembly

Verifying Operation of the Equipment

Once assembly is complete, verify safe operation by checking the following
points:
 Cable tension is correct and the cable is moving smoothly on its pulleys.
 The movement arm is stable and moves smoothly through its range of
motion.
CAUTION: If the cable does not slide smoothly throughout its path, stop
equipment use immediately and recheck the cable assembly.
15