Hauling The Machine; Transporting The Sprayer; Towing The Sprayer - Toro Multi Pro 5800-G Operator's Manual

Figure 47
4. Press button 1 through 5 to view the active fault
list ; refer to Figure 44
Messages (page
•
Press button 1 or 2 to navigate up or down
the list.
•
Press button 3 to mute the audio alarm.
5. Press button 5 to exit the active fault list and
return to the home screen; refer to
Engine Advisories Messages (page

Hauling the Machine

•
Use full-width ramps for loading the machine onto
a trailer or truck.
•
Tie the machine down securely.

Transporting the Sprayer

For moving the sprayer long distances, use a trailer.
Secure the sprayer to the trailer. Also, ensure that the
outer boom sections are tied down and secure.
48 and Figure 49 illustrate the tie-down points.
Figure 48
1. Tie-down points
in Engine Advisories
40).
Figure 45
40).
1. Rear tie-down point
g194663

Towing the Sprayer

In case of an emergency, the sprayer can be towed
for a short distance after you open the tow valve.
However, we do not recommend this as a standard
procedure.
WARNING
in
Towing at excessive speeds could cause a
loss of steering control, resulting in personal
injury.
Never tow the sprayer at faster than 4.8 kph
(3 mph).
Towing the sprayer is a 2-person job. If the machine
must be moved a considerable distance, transport it
on a truck or trailer; refer to
(page 42).
1. Allow the exhaust system to cool completely.
2. Remove the undercarriage shroud; refer to
Removing the Undercarriage Shroud (page
Figure
3. Rotate the tow valve
direction to open the tow valve.
g002210
42
Figure 49
Transporting the Sprayer
(Figure 50) 90° in either
g002211
50).