Toro Multi Pro 5800-G Operator's Manual page 78

Figure 105
Section-Valve Actuator Shown (the agitation valve actuator
is similar)
1. Actuator (section valve)
2. Retainer
3. Remove the actuator from the manifold valve.
g032545
3. Stem port
Removing the Agitation-Manifold
Valve
1. Remove the quick connect pin that secures the
quick-connect coupler for the agitation hose to
the manifold for the agitation valve
1. Flange (pressure-filter
head)
2. Flange (coupling adapter)
3. Flange clamp
2. Remove the 3 flange clamps that secure the
agitation-valve manifold to the flanges of the
pressure-filter head and the coupling adapter
(Figure 106).
3. Remove the 2 flange-head bolts (1/4 x 3/4 inch)
and 2 flange locknuts (1/4 inch) that secure the
agitation-valve manifold to the valve support
(Figure 107).
78
(Figure
Figure 106
4. Quick-connect pin
5. Quick-connect coupler
(agitation hose)
6. Quick-connect fitting
(agitation-valve manifold)
106).
g191301