Toro Multi Pro 5800-G Operator's Manual page 81

Cleaning the Manifold Valve
1. Position the valve stem so that it is in the closed
position (Figure 111B).
Figure 111
1. Valve open
2. Remove the 2 end-cap-fitting assemblies from
each end of the manifold body
Figure 113).
g027562
2. Valve closed
(Figure 112 and
Agitation Valve Manifold
1. Stem retainer
2. Valve stem
3. Stem port
4. Stem-capture retainer
5. End-cap fitting
6. End-cap seal O-ring
(0.796 x 0.139 inch)
81
Figure 112
7. Back seating O-ring (0.676
x 0.07 inch)
8. Valve-seat ring
9. Manifold body
10. Ball valve
11. End-cap-fitting assembly
g028243