Spray Filter Recommendations - Toro Multi Pro 5800-G Operator's Manual

Spray Filter
Recommendations
Selecting a Suction Filter
Standard Equipment: 50 mesh suction filter (blue)
Use the suction filter table to identify the screen
mesh for the spray nozzles you are using based
on chemicals products or solutions with a viscosity
equivalent to water.
Suction Filter Table
Spray Nozzle Screen Mesh
Color Code (flow Size*
rate)
Yellow (0.2 gpm) 50
Red (0.4 gpm) 50
Brown (0.5 gpm) 50 (or 30)
30
Gray (0.6 gpm)
White (0.8 gpm) 30
Blue (1.0 gpm) 30
Green (1.5 gpm) 30
*The mesh size of the suction filters in this table
are based on spray chemicals or solutions with the
viscosity equivalent to water.
Important:
When you spray with higher viscosity
(thicker) chemical products or solutions with
wettable powders, you may need to use an coarser
screen mesh for the optional suction filter; refer
to Figure 53.
Figure 53
Mesh size—chemical or solution viscosity
1. Higher-viscosity chemicals
or solutions
2. Lower-viscosity chemicals
or solutions
Filter Color Code
Blue
Blue
Blue (or green)
Green
Green
Green
Green
g214212
3. Screen mesh size
When you spray at a higher application rate, consider
using an courser optional suction-filter mesh; refer
to Figure 54.
Mesh size—application rate
1. Higher application rate
2. Lower application rate
44
Figure 54
3. Screen mesh size
g214214