Daily Maintenance Checklist - Toro Multi Pro 5800-G Operator's Manual

Maintenance Service
Interval
Every 400 hours
Every 1,000 hours
Yearly

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check Item
Check the brake and parking-brake
operation.
Check the neutral-lockout-switch
operation.
Check the fuel level.
Check the engine-oil level.
Check the hydraulic-fluid level.
Check the coolant level.
Inspect the air filter.
Inspect the radiator and oil cooler for
debris.
Check for any unusual engine noises.
Check for any unusual operating noises.
Check the tire air pressure.
Check for fluid leaks.
Check all hydraulic and fluid hoses for
damage, kinks, or wear.
Check the instrument operation.
Check the accelerator operation.
Clean the suction strainer.
Lubricate all grease fittings
Touch up any damaged paint.
Maintenance Procedure
• Grease the actuator-rod bearings.
• Complete all yearly maintenance procedures specified in the engine operator's
manual.
• Check the fuel lines and connections.
• Service the fuel filter.
• Drain and clean the fuel tank.
• Pack the front wheel bearings.
• Change the planetary-gearbox fluid.
• Check the coolant (as directed by the manufacturer) and change if necessary.
• Replace the hydraulic-fluid filters.
• Change the hydraulic fluid.
• Inspect the O-rings in the valve assemblies and replace them if necessary.
• Change the suction filter.
• Change the pressure filter.
• Inspect the nylon pivot bushings.
• Inspect the pump diaphragm and replace if necessary.
• Inspect the pump check valves and replace if necessary.
• Check the PCV valve.
• Flush the sprayer with clean water.
• Calibrate the agitation-bypass valve.
For the week of:
Monday
1
Tuesday Wednesday Thursday
48
Friday
Saturday Sunday