Accessing Radeaglet-R Data; Storage Management; Data Transfer - Ametek Ortec radEAGLET-R Series User Manual

Table of Contents

6 Accessing radEAGLET-R Data

The radEAGLET-R can save a lot of your measurement results in its database, for example,

spectra (5.1, p. 48), alarm logs (4, p. 43), or screenshots (2.2.5, p. 30).

An overview of data stored on the radEAGLET-R ist available on the instrument (5.22, p. 82)

or in the Web interface (7.10, p. 118).

You can transfer data from the radEAGLET-R to other devices, usually computers, for print-

ing, further processing, evaluation, or archival.

Data can be transferred directly via a connection to another device or indirectly with a

removable storage medium.

USB Mass Storage

You can connect a USB mass storage device, for example, a USB stick, to your

radEAGLET-R and move or copy all available data to it (5.11.2, p. 67).

USB Cable

Connect the magnetic USB connector of the radEAGLET-R (Fig. 4, p. 20) to a USB-A

host connector of your device.

For some computers or operating systems a special driver software is needed

to connect to the radEAGLET-R via USB cable.

These drivers and installation instructions are availble via the Internet. Please

refer to

https://beagleboard.org/static/beaglebone/latest/

README.htm#step2

or visit our website to find current information on driver software under

http://www.innoriid.com/drivers/

You can check whether your computer recognizes the connected radEAGLET-R. The

method depends on your computer's operating system.

Microsoft Windows

Information is available in the "Device Manager". The method to open the device

manager varies with the version of Windows (Vista, 7, 10, etc.). Please refer

to the documentation of your Windows version for details. The radEAGLET-R

Software 3.2.12r • Document 3.3.3b4o

95/163

Table of Contents