Collect Reachback; Reset To Factory Settings; Settings For A New Measurement - Ametek Ortec radEAGLET-R Series User Manual

5.25 Collect Reachback

5.25 Collect Reachback
This command initiates a collection of measurements for a reachback SOP. Initially, the col-
lection is empty.
To collect reachback data...
1. Press New
2. Choose the type of measurement (background, known source, or unknown source,
Fig. 87, p. 86).
3. Specify the duration of the measurement (To change default values see 5.6, p. 58).
86/163
Figure 86:

Reset to factory settings

to add a measurement.
Figure 87:

Settings for a new measurement

Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R User Manual
© innoRIID GmbH • 2020-11-18