The Lanyard Connector Of The Radeaglet-R - Ametek Ortec radEAGLET-R Series User Manual

radEAGLET-R User Manual
The SD card will be ejected by a spring, if you push it gently. To re-insert it, push
the card until it snaps into place.
Lanyard connector at rear end
The lanyard of the radEAGLET-R snaps into the connector (Fig. 4, p. 20). To release
the fastener press the button in the center (Fig. 6, p. 21) and pull the lanyard away
from the instrument.
© innoRIID GmbH • 2020-11-18
Figure 6:

The lanyard connector of the radEAGLET-R

Software 3.2.12r • Document 3.3.3b4o
Push Here to Release
Welcome
21/163