The Easy Id Spectrum Acquisition - Ametek Ortec radEAGLET-R Series User Manual

radEAGLET-R User Manual
9.4.2 Identification
The Easy ID procedure (3.2, p. 37) acquires a spectrum, compares it to the nuclide library
and shows results.
To identify radionuclides...
1. Ensure the Dose Rate screen is shown. If it isn't, press
2. Switch to Easy ID
The radEAGLET-R acquires a spectrum for a preset duration (see 5.20, p. 78). A
chart with a colored bar (Fig. 148, p. 137) helps you to find the best distance between
instrument and source.
3. If you need some time to find the best distance, press
recorded as yet and to restart the timer.
4. After the preset duration elapsed, the radEAGLET-R analyzes the recorded spectrum
and displays the result (Fig. 149, p. 138).
The spectrum and the results are saved in the radEAGLET-R's database under a name
shown on the screen. It is composed of the current date and time (in ISO 8601 for-
mat) and an index number.
If you want to have your position saved with the results of your survey, make sure
GPS is switched on and receives enough satellite data. See chapter 5.13, p.
for details.
This item is available for radEAGLET-R models equipped with a GPS receiver
(see E.1, p. 153).
© innoRIID GmbH • 2020-11-18
mode.
Figure 148:

The Easy ID spectrum acquisition

Software 3.2.12r • Document 3.3.3b4o
Exit until it is.
Reset to clear the spectrum
Tutorial
70
137/163