9.1 Turn on the radEAGLET-R
6. The radEAGLET-R begins an initial stabilization (Fig. 134, p. 128).
7. After the stabilization the radEAGLET-R switches to Dose Rate Mode (3.1, p. 35).
You can adjust the backlight brightness of your radEAGLET-R's LCD display to the light-
ing conditions of your surrounding (see 5.4, p. 56). The lower the backlight brightness,
the longer the battery lasts.
9.1.1 Check the Status of the radEAGLET-R
After startup the radEAGLET-R is ready for use. The top of the screen (Fig. 135, p. 128)
always shows the status of important features of the instrument, e.g., stabilization or battery
power. For a detailed description of the status bar see chapter 2.1, p. 23.
Stabilization
Spectrum Acquisition
Data Logging
Several commands are available to inspect other status information. They are listed in
Fig. 136, p. 129.
128/163
Figure 134:
Initial Stabilization during instrument start
GPS
Figure 135:
Status bar along the display's top edge
Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R User Manual
Communication
Current Time
Battery
© innoRIID GmbH • 2020-11-18