Table of Contents
Advertisement
radEAGLET-R User Manual
9.5.1 Transfer to a Local Computer
You can use any reasonably modern Web browser on your computer to communicate with
the radEAGLET-R.
JavaScript is required for the radEAGLET-R Web interface and must be supported by
the browser.
To acess the radEAGLET-R from a computer...
1. Ensure the Dose Rate screen is shown. If it isn't, press
2. Open the
Advanced
3. Scroll down to
4. Scroll down to
5. Scroll down to
6. The radEAGLET-R shows information about the status of the Web interface and the
IP address to connect to from your computer's Web browser (Fig. 150, p. 139).
7. Open the given IP address with the Web browser on your computer.
Usually the IP address is always the same. You don't have to check it each time
your connect the radEAGLET-R to a computer. You might want to set a bookmark
in your browser.
You should see a page similar to Fig. 151, p.
connected radEAGLET-R.
8. Click
at the top to reveal the menu of the web interface (Fig. 152, p. 140).
Find a full description of all the options in chapter 7, p. 99.
© innoRIID GmbH • 2020-11-18
menu.
Basic Settings
and
Connectivity
and
USB
and
Select
Figure 150:
USB cable connection information
Software 3.2.12r • Document 3.3.3b4o
Exit
Select
it.
Select
it.
it (5.11.1, p. 66).
140
with general information about the
Tutorial
until it is.
139/163
Advertisement
Table of Contents
