The Standard Black Rechargeable Powercell Of The Radeaglet-R; Status Check Of The Black Powercell Of The Radeaglet-R - Ametek Ortec radEAGLET-R Series User Manual

8.2 Replacing Batteries of the radEAGLET-R
Figure 128:
Rechargeable batteries should not be completely discharged. If you don't use them
for a while, make sure to charge it periodically as specified in Appendix E.1, p. 153.
Do not unscrew the black powerCELL. There are no user servicable parts inside.
To check the status of a black powerCELL...
1. Press the marked button on the contact side of the black powerCELL (Fig. 129,
p. 122).
2. Observe the LED. It flashes in a pattern proportional to the current status:
• No light: Empty
• Continuous light: Full
Figure 129:
8.2 Replacing Batteries of the radEAGLET-R
You can replace the powerCELL of the radEAGLET-R.
You can replace powerCELL while the radEAGLET-R is running. An internal buffer
provides power for at most 30 minutes. It is recharged automatically.
122/163

The standard black rechargeable powerCELL of the radEAGLET-R.


Press
LED
<25 %

Status check of the black powerCELL of the radEAGLET-R.

Software 3.2.12r • Document 3.3.3b4o
Insertion Direction
50 % 75 % 100 %
radEAGLET-R User Manual
Contacts
Contacts
© innoRIID GmbH • 2020-11-18