5.13 GPS
5.13 GPS
This item is available for radEAGLET-R models equipped with a GPS receiver (see E.1,
p. 153).
This screen (Fig. 63, p. 70) has the switch for the GPS receiver and shows your location, if
available.
The current GPS status is indicated by a symbol in the status area (see 2.1, p. 23)
When you switch on the GPS receiver, it starts to determine the location. For that it needs
to receive data from a sufficient number off NAVSTAR satellites. The current number is
shown, see Fig. 64, p. 71, and increases after some time, see Fig. 65, p. 71.
If the GPS receiver has sufficient data from enough satellites ("has a fix"), your location ist
shown, see Fig. 66, p. 72.
Settings and Commands
Change
Edit the highlighted setting.
Exit
Return to the superior screen.
70/163
Figure 63:
The GPS settings when GPS is off
Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R User Manual
GPS Status
© innoRIID GmbH • 2020-11-18