Usb Connections; Usb Cable To Host Computer; Usb Cable Connection Information - Ametek Ortec radEAGLET-R Series User Manual

5.11 USB Connections

Settings and Commands
Connect, Disconnect
Start or stop the connection between the radEAGLET-R and the Bluetooth device.
Remove
Remove a device from the list of known devices.
Exit
Return to the superior screen.
5.11 USB Connections
This command depends on what is connected to the various USB ports of your
radEAGLET-R.
• A cable connects the magnetic USB port to a computer or similar device: see 5.11.1,
p. 66
• A USB storage device (a.k.a. Stick) is plugged into the USB-A Port: see 5.11.2, p.
• A USB Ethernet adaptor is plugged into the USB-A Port: see 5.11.3, p.

5.11.1 USB Cable to Host Computer

This item is available while a cable connects the radEAGLET-R's magnetic USB port
to the host computer or similar device.
This screen shows information about the status of the Web interface and the IP address to
connect to from the Web browser (Fig. 58, p. 66).
66/163
Figure 58:

USB cable connection information

Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R User Manual
67
68
© innoRIID GmbH • 2020-11-18