5.15 Protected Settings
5.15 Protected Settings
You can access the protected settings of the radEAGLET-R via this menu (Fig. 70, p. 74).
Before accessing this menu you have to enter a password (see 2.2.4, p. 28).
亮
Settings and Commands
Exit
Return to the superior screen.
Down
Highlight the next item. Cycles to the top item after you reached the last item.
Select
Select the highlighted item.
5.16 System Information
This screen (Fig. 71, p. 75) shows information about your radEAGLET-R's hardware status.
Please have these data at hand when contacting our support.
High Voltage
Typical values are between 500 V and 800 V.
Battery Temperature
The value should be between 0 °C and 50 °C.
Crystal Temperature
The value should be between -20 °C and 55 °C.
Fine Gain
The value should be ±10 %.
Last Stabilization
Time elapsed since the last successfull stabilization of the instrument (see C.1,
p. 147).
74/163
System Information . . . . . . . . . . . . . . . see 5.16, p.
Alarm Settings . . . . . . . . . . . . . . . . . . . see 5.17, p.
Calibration . . . . . . . . . . . . . . . . . . . . . . . see 5.18, p.
ID Settings . . . . . . . . . . . . . . . . . . . . . . . see 5.19, p.
Storage Management . . . . . . . . . . . . . see 5.22, p.
Set Password . . . . . . . . . . . . . . . . . . . . see 5.23, p.
Factory Settings . . . . . . . . . . . . . . . . . . see 5.24, p.
Figure 70:
The protected settings menu
Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R User Manual
74
75
76
78
82
85
85
© innoRIID GmbH • 2020-11-18