Saving Screenshots; Status Bar After Saving A Screenshot - Ametek Ortec radEAGLET-R Series User Manual

2.2 Using the radEAGLET-R Keys
Settings and Commands
Repeat
Repeat the entry in case you are not sure whether you pressed they keys in the correct
sequence.
Cancel
Cancel the password entry and quit accessing the protected settings.
Accept
Confirm your entry and have the radEAGLET-R check it for correctness. If your entry
was incorrect, you will be notified and the password entry will start over.

2.2.5 Saving Screenshots

You can save the contents of the radEAGLET-R's display, for example, to document a certain
result or for your inhouse training material.
To save a screenshot...
1. Press and hold
2. Press .
You will be informed that a screen shot was saved in the status bar of the display
(Fig. 15, p. 30). This message disappears after a moment.
The screenshot is saved as *.png image. The file name is is built from the technical
name of the current screen and the current date and time in ISO format, for example
DoseRateScreen 20181018­231111.png.
30/163
.
Figure 15:

Status bar after saving a screenshot

Software 3.2.12r • Document 3.3.3b4o
radEAGLET-R User Manual
Message
© innoRIID GmbH • 2020-11-18